2 Sets Car Brake Bleeder Kit with Brake Bleeder Hose One Way Check Valve,Upgraded Grease Fitting Caps/Brakes Bleeding Kit for System Maintenance,Clear Hose/Brakes Bleeders Check Valve Kits

CAR BRAKE BLEEDER KIT TO HELP YOUR BRAKE SYSTEM BLEED EFFICIENTLYProduct AttributesColors: TransparentSizes: Hose 1: Length: 13.98 inch, OD: 0.32 inch, ID: 0.19 inch Hose 2: Length: 5.91 inch, OD: 0.24 inch, ID: 0.16 inch One-way Check Valve: 2.09*0.5*0.5 inchWeight: 5.2 ozMaterial: PVC, Aluminum Alloy, RubberPackaging: Brake Bleeder Cap*6, Clamp*6, One-way Check Valve*2, Hose*4Procedure for Use1. Detach the protective cover of the drain valve and connect the hose side to the drain valve connector tightly to check that the hose is securely connected2. Locate the oil filler cap and unscrew the cap screws3. Use a suitable tool to slowly loosen the oil drain screw. At this point, the old brake fluid will slowly flow out of the hose4. Add new standardized brake fluid to the inside, at the same time, squeeze the brake by hand, the fluid level should be higher than the drain port, this is the core point to avoid air entering the brake line5. Repeat the fourth step above until you see that the fluid coming out of the hose has the clear color of new fluid and there are no air bubbles, indicating that the old fluid in the system has been completely replaced, you can stop the cycle action6. Use the screws to re-tighten the oil capProduct Functions & Features1. The car brake bleeder hose is transparent design, in the process of brake bleeding can smoothly guide the flow of brake fluid to avoid spillage and splashing, and the situation inside the hose can be seen at a glance2. The brake bleeder caps in the car brake bleeder tool protect the bleeder screws and can be tightly fitted after the bleeding process is completed to realize a dust-proof seal3. The clamps in the car brake bleeder one way valve hose kit are indispensable during the bleeder process, holding the hose firmly in place at the connection and avoiding loosening during handling due to vibration or pressure changes

• Practical One-way Check Valve: Backflow is always a central problem in the critical area of car brake bleeding, our car break bleeder kit provides one-way check valves, so that you can get rid of the trouble of "repeated bleeder and still has air" during handling and avoid backflow
• Brake Bleeding Kit: The core requirement of car brake bleeding is to completely discharge the air and old brake fluid in the system to make braking more sensitive, our car brake bleed kit can efficiently help you to complete the bleeding work, which is an indispensable tool for car maintenance
• Complete Kit: Our motorcycle brake bleeder kit has the necessary brake bleeder caps, clamps, one-way check valves, and hoses for you to bleed. The hose directs the flow of brake fluid, while the caps provide a dust-tight seal for the bleeder screws and the clamps provide clamping force
• Sturdy & Transparent: Aluminum alloy is used as the main material of the check valve to give it good structural strength, and the PVC hose in the brake system bleeding tools features transparent visibility, so that you can clearly see the fluid flow inside the hose
• Quick Bleed: Our car brake bleeding tool is not complicated to use the steps, the hose and one-way check valve according to the interface precision butt, the hose side connected to the oil drain screw, gently unscrew the open oil screw, you can start to bleed